This was my first attempt at making a somewhat usable car. I loosely based it off of low-riders and hot rods, but threw it some racing flares like the spoiler and double stripe paint job. The controls for the car are what took an entire day learning, and it could still probably be improved. Right now you would hold SPACE to make the engine start, then W/S for forward/reverse respectively. I had to use two separate clutch systems to get that to work (which is why I say there’s probably a better way to do this). I use a gasoline engine from TFGM and instead of feeding the CO2 into an exhaust, I just have it going into a trash can, and I used a fake exhaust (I think it’s the Link 'n Pin from Steam 'n Rails) on the back. The car on the ground is relatively low. I tried to get it as low as possible using the center of the player as reference (when you’re standing in front of a civilian car, the hood generally is at your hip height). This worked about as well as it could, although there’s some minor clipping in the front due to the necessity for a lower suspension (and my lack of adequate wheel well spacing).
Overall, I’m rather happy with the way this car turned out. If I’m going to continue making cars in the future, the one thing I really want to do is make it much, much smaller. This car is about 5x9 I think, and the average civilian car is about half that size; so it’s going to be a challenge getting all of this into half the size. I think I can pull it off though. I hope everyone likes it!
2026-01-13_15.28.42.png
2026-01-13_15.28.49.png
2026-01-13_15.28.54.png
2026-01-13_15.29.00.png
2026-01-13_15.29.19.png
2026-01-13_14.22.13.png
rn_image_picker_lib_temp_af04dedc-f25f-4b3d-9efb-8ec56bb56ee0.jpg
image.png