how to assign custom fluids for VS2?
Screenshot_2026-01-20_193747.png
how to assign custom fluids for VS2?
Screenshot_2026-01-20_193747.png
it appears that, if the block state is considered “liquid” (set by mods, not by your datapack), then specifying mass actually specifies fluid density, and specifying friction actually specifies drag coefficient
it doesn’t seem to work
[
{
“block”: “tfc:river_water”,
“mass”: 1000,
},
{
“block”: “tfc:spring_water”,
“mass”: 3920,
}
]
Screenshot_2026-01-20_194906.png
Screenshot_2026-01-20_194927.png
i restarted it but it still doesn’t float on river water
Screenshot_2026-01-20_195928.png
Yeah I’m not sure whatever moonlight global datapacks is will work
also i tried to add it through fluid bc fill command shows fluid/
[
{
“block”: “tfc:fluid/river_water”,
“mass”: 1000,
},
{
“block”: “tfc:spring_water”,
“mass”: 3920,
}
]
Screenshot_2026-01-20_200057.png
is water also assigned with mass and simmilar using datapacks or it’s hardcoded?
I’m sure if you step through the fluid block state registration with a breakpoint the reason its not working will become clear
these problems usually aren’t too hard to spot if you’ve got an actual datapack to debug step by step
This conversation is on Discord · Reply there