me and my friend actually did a lot of experimenting to figure out how everything works so we could get to the points we’re at.
The most important things to remember from what we’ve gathered is that there needs to be an exhaust somewhere along the ductwork, for a level 9 steam engine putting one within the first 5 levels of the ductwork from the steam extractor works pretty well but if you build a system and it blows up rebuild it and put the exhaust closer to the steam extractor, the system can only handle 16.4k kPa
The number of nozzles also seems to affect the balance of the balloon temperature, 1 nozzle basically makes airships jump up and down a bunch and is really hard to stabilize, 2 nozzles stabilizes the airship a lot more but you still get jumping around and the temperature can jump and plummet, 3 nozzles I haven’t run into any issues with when it comes to keeping a balance of balloon temperature or massive jumps in altitude, though controlling the altitude is difficult since the rotation control for the nozzle temperatures is waaaaaay too sensitive